Herpetosure®

• Quick Links:
• Newt Fencing
• Snake Fencing

Newt Fencing Diagram

NEWT FENCING

NEWT FENCING SPECIFICATIONS

• Temporary newt fencing panel size; 3000 X 750 X 3mm green recycled polypropylene panels
• Permanent newt fencing panel size; 3000 X 750 X 4mm green recycled polypropylene panels

NEWT FENCING FITTED MEASUREMENTS

Newt fencing is installed 300mm vertically below ground, 375mm vertically above ground

NEWT FENCING FITTING DESCRIPTION

The newt fencing panels are fitted either into a 300 x 50mm slit created by a V backed sub soiler or “wiz" plough pulled by a tractor or in a trench excavated using a chain trencher or mini digger. Alternatively, if necessary, the trench is dug by hand.

The preferred newt fencing method for best results and most efficient fitment is the slitting method, where conditions suit. Once the newt fencing panels are sited the slit is closed up by driving back along the line of the newt fence with a tractor, vehicle or compacted by hand. This creates a total seal between the soil and the newt fencing panels, which are fitted to the side of the trench nearest to the relevant population or the inside if a containment area. The newt fencing panels are overlapped by 50mm then secured by aluminium blind rivets along the overlap joint. Newt fencing panels can be cut down or the overlap increased to allow for uneven ground or contours.

HERPETOSURE® newt fencing is designed to be reusable and recyclable, it also has a high level of impact resistance, therefore offering a much higher level of boundary security and removing the need to landfill expired fencing materials at the end of the project. ZERO project waste.